Raptor Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
My son lost the key to the Raptor 80 in the yard. I found it; With the lawnmower...

I had a lighted switch with 3 posts on it, Power, Acc, and Ground. I connected the Red wire to Power, the Black to Ground and I twisted the Black/White & Brown together and hooked them to the Accessory contact. I plugged it up and the switch lit up when turned on and the ATV would turn over but wouldn't start. I flipped the Engine Off/Run switch (above the momentary start switch) and the light on the switch went off. When I flipped it back to Run the switch that replaced the key wouldn't come on. Does anyone know how to wire up a switch to replace the key on this machine?
 
1 - 1 of 1 Posts
Top