Raptor Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter · #1 ·
I still can't get my raptor to crank over I took the cover off and check decomp pin and it works I turned the cam so the lobes are down at TDC. I currently have the wiring harness off repairing it. How can I make sure it will crank and not mess up the wiring again. I've jumped the starter and it gets to compression and stops PLZ HELP IM GOING NUTS
 
1 - 1 of 1 Posts
Top