Raptor Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
343 Posts
probably. but the only way to know is to see how it runs with the filter and lid. my guess is that you will probably be too big on your mains.
follow the sticky that tells you how to change jets in carbs to get in to see what your mains, needle and a/f screws are set at and then go from there to see how your plug looks when you start testing it.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top