Raptor Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
2,474 Posts
Discussion Starter · #1 ·
Lots of Talk on Front Shock replacments With YFZ's What about Rear Shock? YFZ's Bolt on? Or is it even worth tryin considering Stock Rappy Rear isnt to bad?
 

·
Registered
Joined
·
1,568 Posts
Many people on here talk about sending the stock unit in and getting it re-sprung, revalved, ect. I believe it was TCS they were talking about. sure they'll chime in.
 

·
Registered
Joined
·
1,726 Posts
To my knowledge the raptor rear is a respectable shock. It is fully rebuildable.

The yfz shock won't fit, the lower mount is opposite of the raptor.

TCS did my rebuild, I'm happy, I've never read a bad report about TCS.
 

·
Registered
Joined
·
2,615 Posts
How much you pay for rebuild?
 

·
Registered
Joined
·
120 Posts
Can someone try this test on your stock 660 rear shock? The top screw near the rezzy - if I turn that in either direction, I see no difference whatsoever when I push down on the rear end of the Raptor. The bottom screw makes a huge difference, very noticeable. but the top screw has about 2 1/4 turns total, and no matter where I put the screw I can't see a difference.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top