Raptor Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
So I hit the starter and it just spun but didn't turn the engine over.
Here is some background. I just rebuilt the transmission because there was some bad forks and pinions. I got everything back together last night and rode it for a few hours today. Using the starter many times. Then all of the sudden the starter just free wheels.

So I pulled the cover off and found the three bolts that connect the rotor to the one way clutch sheared off.

Does anyone know what could cause this?
I just want to know that when I buy the new parts and put it back together this isn't going to happen again.
 

·
Registered
Joined
·
26 Posts
did you maybe install the one way clutch in wrong. when i installed my crank my one way fell apart and when i reinstalled the bearings i didnt realize that the bearings will go in both ways,but only one way is correct. when i tried to start the engine the one way clutch broke. it was a 200 dollar mistake that the dealer was happy to order the parts for.
 
1 - 2 of 2 Posts
Top