Raptor Forum banner
1 - 9 of 9 Posts

·
Registered
Joined
·
320 Posts
Discussion Starter · #1 ·
My cylender is at the shop just got hone but for extra 40 they will bore it. Will i be able to tell much between standered bore highcompression and a .40 high compression bore?
 

·
Registered
Joined
·
240 Posts
yes. But if your gonna bore it get the piston you want first and have them bore the cyl to the piston. Go find a nice 102mm piston and when your done you'll have a 686!!
 

·
Registered
Joined
·
960 Posts
i thought the 100.5 was .40 over made it the 686 wesaco that was
 

·
Registered
Joined
·
65 Posts
if you got the 100.5 yor cylinder would be 666cc
 

·
Registered
Joined
·
960 Posts
as long as you are in the engine get a 4mm stroker and a 102 piston make it a 720 :)
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top