Raptor Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hi all,

I’ve unburied my 2013 125 for the first time in a few years from the garage and of course it didn’t start. I just put a new battery in, changed the oil, new spark plug with dielectric grease, and the starter wouldn’t try to spin. I put a new starter in as well and I’ll get a click at the solenoid when I push the start button.

I’ve bypassed the solenoid to see if that was the issue by touching both bolts and still nothing but a high pitched whine from the machine. The rubber covering the wire where it meets the starter assembly, and the starter itself get very hot to the touch after trying to start it several times so I know it’s getting current, but not a single spin from the starter. Thoughts?
 
1 - 1 of 1 Posts
Top