Raptor Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
37 Posts
Discussion Starter · #1 ·
Hoping for some help, pics if possible would be good.
(After breaking my right arm, and now with plate screwed in just above my wrist, I'm finding riding the 700r on rough ground is causing some problems due to the shocks onto/into my arm)

So I am going to buy a Precision Steering Dampner, but not really sure how they attach to the stem, and if anything else needs to be modified on the stem itself. Hoping its pretty straightforward.

If anyone can give me some pointers on this, much appreciated.

Cheers
Mad_Dad
 

·
Registered
Joined
·
104 Posts
they clamp around the frame and though the cross member there between there frame rails in front of the stem.
to hook to the stem it uses a set screw and clamp around the stem
it is the same model that is used on the yfz so you can see it on the web site sorry no pics
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top