Raptor Forum banner
1 - 9 of 9 Posts

·
Registered
Joined
·
128 Posts
Discussion Starter · #1 ·
Well I got my shocks last night. I got them install and tight it up well, top and bottom. But I notice that the sock had some free play. Example, if you grab the piggy you can push it back and forward. I’m not sure if this is normal since I notice that the stock did not do it. Is this normal? :3question:
 

·
Registered
Joined
·
54 Posts
I will have mine on next week hopefully, and I will let you know if there's any play. Otherwise I'd call Elka.

DJ
 

·
Registered
Joined
·
166 Posts
Mine definately have free play, I noticed it after installing them.
 

·
Registered
Joined
·
779 Posts
While working on my stock suspension (700SE), I noticed the shock can move back and forth a small amount on the mounting bolt, roughly 1/16". I'd say totally normal, the shock pivots on this bolt so it has to be free to do so. I'd say you are good to go. Nice setup btw, seeing all these done up bikes makes my wallet cringe lol.

MK
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top