Thermostat or not on full race engine? (660)
1 - 3 of 3 Posts
Joined
·
1,674 Posts
Keep the thermostat. It holds the coolant in the radiator a little longer, so you get a little less flow, but the incoming coolant is cooler.
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
Big bore & striker for the 660 for a RHINO
Raptor 660 ModificationsHey guys I’ve done my searching and a lot of threads on the big bore striker are old ! I have a 660 in my Rhino I need to rebuild and was looking to do a 60hpish build was thinking of a hot rods 4mm striker crank and a 102mm CP or wiseco piston, cleaned up head with a bored out stock carb and...- 1
- 99
-
2001 660 Raptor: Odd Running Condition
Raptor 660 ModificationsNew to the Raptors, first time owner, not a certified mechanic but Ive worked on a bunch of various motor driven vehicles/toys. Bought a 01 660 running and riding but as a fixer upper project for $600. It needed a few mechanical and cosmetic issues fixed, tires, wheel bearings, etc but the...- 13
- 272
-
scottyb1987 · updated
-
big bore, stage 2 cam and springs
Raptor 660 ModificationsI'm thinking of putting an Alba Racing 686cc (102mm) big bore kit in and a hot cam stage 2 with the recommended valve springs. Will my crank and rod be able to handle this and will i be able to run 91 octane pump still? Also what jetting will i need? 2001 raptor 660 stage 1 cam wiseco...- 1
- 65
-
has anyone tried the oversize "ebay" radiator?
Raptor 660 Modificationsiv got a hole in my stock radiator. iv never had any trouble with the stock unit keeping my engine cool, but i figured if i had to get a new one i would possibly upgrade. there are some $100 oversize units on ebay, and there are some expensive aftermarket units out there......but i cant...- 14
- 8K
-
Bocephus · updated
-
660 jetting
Raptor 660 ModificationsHi I have a raptor 660 I recently installed a pro design air filter and full hmf exhaust I am running with the air box lid on I need recommendations on jet size,pilot jet size,needle position,pilot screw position thanks- 3
- 251
Join now to ask and comment!