Can you post a link of this kit so we can provide some input?

 

Something like this.

09+ Raptor 700 Big Bore Kit 105.5 Cylinder Stage 3 Hotcam Top End Rebuild Kit

09+ Raptor 700 Big Bore Kit 105.5 Cylinder Stage 3 Hotcam Top End Rebuild Kit

bpratv.com

 

Nothing wrong with a 734, even on a totally stock crank. The issue is that kit contains the cheapest of cheap parts. For example, where it references the lifetime warranty on the head studs, it says only for failure while in use, not failure during install. Those studs are known to snap off at the 4mm hex with almost no pressure.

I would suggest contacting a reputable shop to source quality parts that will compliment each other. Cuervo atv, racers edge, OCP Utah, Newman’s power sports, ehs, performance atv. Those are the places I would source parts.

 

There is a shop in UK called MadManMechanic who rebuild raptor with different engines etc. They also do stage 3 installs etc.

 

Hello t web, I was wondering what is ocp utah? Are they located in Utah? Thank you in advance

 

Oregon coast power sports, Jeff Shrick moved to Utah.